Skip to main content

This assignment is designed

Prepared by: Dr Imran Ali Jokhio Moderated by: A/Prof Savitri Bevinakoppa July, 2018

Assessment Details and Submission Guidelines
Unit Code MN621
Unit Title Advanced Network Design
Assessment Type Individual written report and group demonstration – T2 2018
Assessment Title Local Area Network Design and Setup
Purpose of the
assessment (with
ULO Mapping)
This assignment is designed to assess students’ knowledge and skills related to the
following learning outcomes:
a. Investigate suitable network designs to match requirements.
b. Create appropriate frameworks and standards for network implementation
Weight 15% of the total assessments
Total Marks 60
Word limit 2500
Due Date Week 8, demonstrate during laboratory class (in groups not more than two students)
and submit report on Moodle(individual report) by the end of week 8.
Submission
Guidelines
All work must be submitted on Moodle by the due date along with a completed
Assignment Cover Page.
The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri (Body) font
and 2 cm margins on all four sides of your page with appropriate section headings.
Reference sources must be cited in the text of the report, and listed appropriately
at the end in a reference list using IEEE referencing style.
Extension If an extension of time to submit work is required, a Special Consideration
Application must be submitted directly to AMS. You must submit this application
within three working days of the assessment due date. Further information is
available at:
https://ift.tt/2P4ZpvJ
and-guidelines/specialconsiderationdeferment
Academic
Misconduct
Academic Misconduct is a serious offence. Depending on the seriousness of the
case, penalties can vary from a written warning or zero marks to exclusion from
the course or rescinding the degree. Students should make themselves familiar
with the full policy and procedure available at:
https://ift.tt/2u01j7Y
mit/institute-publications/policies-procedures-and-guidelines/Plagiarism
Academic-Misconduct-Policy-Procedure
. For further information, please refer to
the Academic Integrity Section in your Unit Description.

MN621 Advanced Network Design Assignment 1 Trimester 2, 2018 Page 2 of 4
Prepared by: Dr. Imran Ali Jokhio Moderated by: A/Prof Savitri Bevinakoppa July, 2019
Assignment Description
A case study: Local Area Network design and configuration
There is an organisation which is primarily e-commerce business. It is going through a major transformation
because of its expansion. The expansion is due to merger of two smaller businesses to the organisation. Now,
the organisation is moving to a new building having about 100 employees. The new building is of three floors.
The ground floor is for reception, foyer and warehouse so there is a need of five data points at reception, four
in warehouse and two in foyer. The 1
st floor consists of five offices and forty open plan office cubicles. The 2nd
floor consists of three rooms, each room have four office cubicles, two offices and thirty open plan cubicles.
There is also a meeting room at 2
nd floor that requires four data points. Each and every person needs two data
points at their desk whether it’s an office, room cubicle or open plan cubicle. Each floor also needs wireless
connectivity.
This organisation needs a new LAN plan, design and implementation before they move to new facility.
Description
Design a local area network for the given case study.
Write a report on a network plan and configurations having following sections:
1. Analyse the need for the network for above case study. Investigate and propose a suitable complete
network design for the case study.
2. Write a detailed setup of network devices only for a LAN.
3. Write a detailed implementation report which includes configurations of each networking device
which are included in the whole network.
4. Demonstrate and compare at least 2 configuration results which may include at least two
switches/routers and two PCs on physical networking devices. [20 marks]
Demonstration: Students can demonstrate in a group of 2. Students should be ready with all setup and
configurations before start of the laboratory class. Tutor will ask 2-3 questions to each student to demonstrate
any configuration of the setup. Demonstration from each student should not be more than 3 minutes.
Students should give their group members to tutor in week 7 during lab class. Students will get demonstration
timetable before start of the week 8 lab class.

MN621 Advanced Network Design Assignment 1 Trimester 2, 2018 Page 3 of 4
Prepared by: Dr. Imran Ali Jokhio Moderated by: A/Prof Savitri Bevinakoppa July, 2019
Marking criteria:

Marks Section to be included in
the report
Description of the section
03 Project scope Outline of the report ( in 3-4 sentences)
05 Project hardware
requirements
Name of the network device with manufacturer’s
name, series, model and ports
Type of the cables
Name of the server, PC with specification such as
operating system, RAM, hard disk etc.
03 Network Diagram Network diagram is drawn and labelled
07 Network Design Write justification of the network design
20 Network device
configurations commands
Configuration commands to configure network
20 Network device
configurations –
Demonstration on physical
device
Demonstration of various features
02 Reference style Follow IEEE reference style
60 Total

MN621 Advanced Network Design Assignment 1 Trimester 2, 2018 Page 4 of 4
Prepared by: Dr. Imran Ali Jokhio Moderated by: A/Prof Savitri Bevinakoppa July, 2019
Marking Rubrics

Grades Excellent
=>80%
Very Good
79
Good Satisfactory Unsatisfactory
Project scope
/3
Concise and
specific to the
project
Topics are
relevant and
soundly
analysed.
Generally
relevant and
analysed.
Some
relevance and
briefly
presented.
This is not relevant to
the assignment topic.
Project
hardware
requirements
5
Demonstrated
excellent ability
to think critically
and sourced
reference
material
appropriately
Demonstrated
excellent
ability to think
critically but
did not source
reference
material
appropriately
Demonstrate
d ability to
think critically
and sourced
reference
material
appropriately
Demonstrated
ability to think
critically and
did not source
reference
material
appropriately
Did not demonstrate
ability to think
critically and did not
source reference
material
appropriately
Network
Design and
diagram /10
Demonstrated
excellent ability
to think critically
and sourced
reference
material
appropriately
Demonstrated
excellent
ability to think
critically but
did not source
reference
material
appropriately
Demonstrate
d ability to
think critically
and sourced
reference
material
appropriately
Demonstrated
ability to think
critically and
did not source
reference
material
appropriately
Did not demonstrate
ability to think
critically and did not
source reference
material
appropriately
Network
device
configurations
– Switch
configuration/
20
All elements are
present and very
well integrated.
Components
present with
good cohesive
Components
present and
mostly well
integrated
Most
components
present
Proposal lacks
structure.
Demonstratio
n /20
Logic is clear and
easy to follow
with strong
arguments
Consistency
logical and
convincing
Mostly
consistent
logical and
convincing
Adequate
cohesion and
conviction
Argument is confused
and disjointed
IEEE
Reference
style/ 2
Clear styles with
excellent source
of references.
Clear
referencing
style
Generally
good
referencing
style
Sometimes
clear
referencing
style
Lacks consistency
with many errors

 

The post This assignment is designed appeared first on My Assignment Tutor.



Logo GET THIS PAPER COMPLETED FOR YOU FROM THE WRITING EXPERTS  CLICK HERE TO ORDER 100% ORIGINAL PAPERS AT PrimeWritersBay.com

Comments