Skip to main content

The Relationship Between Public Relations Excellence

 

Prompt

In this project you will design and build a simple CPU on Logisim and write programs that can run on it. If you haven't yet, you can download Logisim by following this link: http://www.cburch.com/logisim/download.html

Your design will go through four phases. In the first phase, you will design and build the ALU using Logisim. In the second phase, you will design the instruction set that implements the instructions you designed in phase one. In the third phase, you will design and implement a control unit for this ALU using Logisim. By connecting the CPU to the ALU, you will get a functional CPU. In phase four of the project, you will write assembly language programs for the CPU you built.

Phase One

Start by building an 8-bit ALU using Logisim. This ALU can implement 16 instructions on 8-bit operands. We would suggest the following minimum list of instructions:

  • Arithmetic addition
  • Increment
  • Decrement
  • Comparison (with 3 outputs: one for equals, one for less than and one for greater than)
  • Logic bitwise Not
  • Logic bitwise And
  • Logic bitwise Or
  • Register right logic shift
  • Register left logic shift

In addition to these nine instructions, please suggest five more instructions that the ALU can implement for a total of 14 instructions (we are reserving 2 instructions for branching). Justify the importance of the five instructions you added in a Word doc to submitted as part of this assignment. Label these instructions as 'Phase One.'

After you've suggested and justified your five suggested instructions, please build at least the nine above-mentioned operations as blocks in Logisim.

Phase Two

In phase two of the project, you are required to design the instruction set of the ALU/CPU as follows:

  • Create the opcode table for the ALU by giving a binary code and a name for each instruction you built in Logisim in phase one.
  • Decide how many operands you want your instructions to handle and justify your choice. We suggest either one operand with accumulator or two operands with the result stored in one of the input registers.
  • In Logisim, add a multiplexer to the circuit you built in phase one that chooses one of the available operations. The simplest way to create this part of the CPU is to connect the outputs of the multiplexer to the inputs of AND arrays connected to the output of the operation blocks.

Please record your answer to phase two in the same Word doc and label it 'Phase Two.'

Phase Three

In phase three, you are required to use Logisim to implement the control unit for at least the following three operations:

  • addition
  • logic bitwise AND
  • right logic shift

In order to finish this phase, you need to add operand registers according to the decision you took for the number of operands in phase two and, if needed, a flag register.

Please record your answer to phase three in the same Word doc and label it 'Phase Three.'

Phase Four

In order to be able to write assembly language for the CPU we need to add to instructions (without implementation):

  • branch to an address (name it JMP)
  • conditional branch to an address (name it CJMP and suppose that the jump takes place if the comparison operation result is 'equals')

Now, write the following programs using the assembly language you designed in the previous phases of the project as well as these two branching additional instructions:

  • Write a program that adds two operands.
  • Write a program that adds operands until the new value to be added is 0. You do no
  • t need to implement the input operations to modify the contents of the registers. Just assume that by the end of each iteration, the register content is modified.
  • Write a program that increments by 2 the content of a register 10 times.
  • Write a program that shifts the content of a register until the least significant bit is 0. Think of a way to stop shifting if the content of the register is 11111111 and add it to your program.

Please record your programs in the same Word doc and label them under the section 'Phase Four.

WE HAVE DONE THIS QUESTION BEFORE, WE CAN ALSO DO IT FOR YOU

GET SOLUTION FOR THIS ASSIGNMENT, Get Impressive Scores in Your Class

CLICK HERE TO MAKE YOUR ORDER

A current event related to topics in Texas government: state and local politics

TO BE RE-WRITTEN FROM THE SCRATCH

Comments

Post a Comment

Popular posts from this blog

Should pit bull terriers be banned in my community

 Discussion Forum: Counterarguments (Should pit bull terriers be banned in my community) You created a question about the topic for your W6 Rough Draft. For this discussion, you will give an answer to that question in the form of a thesis statement. "Dieting Makes People Fat" Main Post: Share your thesis statement with your classmates. Please note: As with last week’s discussion, nothing here is set in stone. Be open to changing everything about your topic, including your position and audience, as you research it and get feedback from your classmates. Topic + Position/Purpose + Supporting Points =Thesis Statement Example: Suppose the question you posed in the Week 5 discussion was something like, “Should pit bull terriers be banned in my community?” After doing some preliminary research, you have concluded that pit bulls, if raised properly, are no more dangerous than other breeds of dogs. Your thesis statement can be something like, “Pitbulls should not be banned
Post a Comment
Read more

Controversy Associated With Dissociative Disorders

 Assignment: Controversy Associated With Dissociative Disorders The  DSM-5-TR  is a diagnostic tool. It has evolved over the decades, as have the classifications and criteria within its pages. It is used not just for diagnosis, however, but also for billing, access to services, and legal cases. Not all practitioners are in agreement with the content and structure of the  DSM-5-TR , and dissociative disorders are one such area. These disorders can be difficult to distinguish and diagnose. There is also controversy in the field over the legitimacy of certain dissociative disorders, such as dissociative identity disorder, which was formerly called multiple personality disorder. In this Assignment, you will examine the controversy surrounding dissociative disorders. You will also explore clinical, ethical, and legal considerations pertinent to working with patients with these disorders. Photo Credit: Getty Images/Wavebreak Media To Prepare · Review this week’s Learning
Post a Comment
Read more

CYBER SECURITY and how it can impact today's healthcare system and the future

 Start by reading and following these instructions: Create your Assignment submission and be sure to cite your sources, use APA style as required, and check your spelling. Assignment: Recommendations Document Due Week 6 (100 pts) Main Assignment Recommendations Document The 1250 to 1500-word deliverable for this week is an initial draft of your recommendations. Note that this is a working document and may be modified based on insights gained in module eight and your professor's feedback. This document should contain the following elements: Summary of your problem or opportunity definition A list of possible recommendation alternatives. In this section, you are not yet at the point of suggesting the best set of recommendations but you are trying to be creative and explore all the different ways that the problem or opportunity might best be addressed. The end result here will be a list of alternatives among which you will choose your final recom
Post a Comment
Read more